• ikhasi_ikhanda_bg

Imishini kaHawk Three Rip Saw

Incazelo emfushane:

I-Hawk Machinery Three Rip Saw isetshenziselwa ikakhulukazi ukusika ibhodi lonke libe izingcezu ezimbili noma ezintathu ze-substrate, njengephansi laminate, Solid wood floor, bakelite floor, plastic board kanye namanye amabhodi, iwumshini obalulekile wokukhiqiza phansi.


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Imingcele yezobuchwepheshe

Amandla emoto: 3*4KW
Injini yokuphakelayo: 1.5KW
Isivinini esiphezulu: 2980(r/min)
Imininingwane ye-Saw blade: 300mmX3.2mmX2.2mmX40mm
Isivinini sokubona: Okulungisekayo 15~35(m/min)
Ubukhulu be-sawing: 3-25 mm
Ubukhulu: 1160mm*2960mm*1140mm
Isisindo: 2.1(T)

I-Hawk Machinery Three Rip Saw yakhiwe ngomzimba ovalwe ngokugcwele kanye nenkundla yokuphakela nokukhipha.I-saw blade ifakwe ngqo ku-shaft eyinhloko ye-motor, indlela yokudla iqhutshwa yi-motor eguquguqukayo eguquguqukayo, futhi i-roller ye-feed drive ingalungiswa ndawonye, ​​wonke umshini unesakhiwo esihlangene kanye nomklamo othuthukisiwe.

I-Hawk Machinery Three Rip Yabona Izici Ezithuthukisiwe:

1, ubuchwepheshe obuthuthukisiwe, ukusetshenziswa komklamo wesoftware we-3D, ukucubungula isikhungo sokucubungula, ezingeni eliphambili lasekhaya;

2, ukunemba okuphezulu, ukuqina komthungo kuhle, kungahlangabezana nezidingo zokulingisa izinkuni phansi, isaha elijwayelekile le-laminate floor lingafinyelela umphumela womthungo oqondile, okonga impahla;

I-3, ukusebenza okulula, ngokusho kobukhulu besitezi ukulungisa isikhala phakathi kwe-roll yokucindezela ephezulu nephansi, vele ushukumise isibambo ukuze uqedele ukulungiswa komqulu wengcindezi;

4, izikhala ezine ze-saw blade motor ngokulungiswa kwesikulufa, indawo elula futhi esheshayo, enembile;

I-5, ukuvikelwa kwemvelo, umshini wonke uvaliwe ngokuphelele, uthuli olukhiqizwayo lukhishwa ngokuqondile ngohlelo lokukhipha uthuli, indawo yokusebenza ihlanzekile.

Okwesine, izinkomba zobuchwepheshe eziyinhloko:

Amandla amakhulu enjini: 4×3Kw

Isivinini esikhulu semoto: 2980 RPM

Ububanzi be-blade: 300mm

Isivinini sokudla: kulungiswa 25 ~ 40m/min

Ubukhulu bomshini: 3.3m×2m×1.1m

Isisindo somshini: 1.9T

Amandla emoto: 3* 4KW Injini yokuphakelayo: 1.5KW Isivinini esikhulu: 2980(r/min) Ukucaciswa kwe-saw blade: 300mmX3.2mmX2.2mmX40mm Ijubane lesaha: Okulungisekayo 15~35(m/min) Ubukhulu besaha: 3-25mm Ubukhulu: 1160mm *2960mm*1140mm Isisindo: 2.1(T)

Ulayini Wokusika Okuzenzakalelayo Wokusebenza okuphezulu

Isingeniso esifushane

I-Hawk High Performance Auto Cutting Line ihlanganiswe ne-HKJ900 Multi Rip Saw, Vacuum Steering Machine kanye ne-HKC6 Cross Cut saw.I-Hawk High Performance Auto Cutting Line ifaneleka ukusika okunesivinini esikhulu, okunembile nokuqondanisa amapuleti amakhulu, futhi ifaneleka kakhulu izinto eziwugqinsi kancane njenge-dryback SPC floor kanye ne-LVT floor esikhundleni somshini wokubhoboza.I-HKJ900 yesaha ye-HKJ900 ehambayo kanye nedivayisi yokulungisa ezimele ibona ukushintshwa okusheshayo kwe-saha blade kanye nokuguqulwa okusheshayo kokucaciswa kwephansi.Imodi yokuxhumeka kokukhiqiza okuzenzakalelayo ingabona isivinini sokusika samamitha angu-40 ngomzuzu futhi inciphise kakhulu izindleko zokukhiqiza
I-Hawk High Performance Auto Cutting Line:
1. Ukusebenza kahle okuphezulu, ijubane liyi-15-18 pcs / min.
2.Ukunemba okuphezulu, ukuqondisa kwephaneli elawulwa ngaphakathi kwe-0.05-0.10mm/m.
3.Isakhiwo esihlukene se-saha blade kanye ne-motor, ukuze sikwazi ukushintsha ngokushesha futhi kalula ukucaciswa kwemikhiqizo ehlukahlukene.
4.Amasethi esikrini sokuthinta, i-servo motor ilawula ukuhamba kwe-saw blade, ukusebenza okulula, ukunemba okuphezulu.
5.Ukusika isikhunta akudingi, kungonga izindleko kanye nesikhathi sokulungisa.
6.Sika imikhiqizo engakwazi ukucutshungulwa umshini wokunyathelisa (Kufaka imikhiqizo ethile ebangelwa ukushuba, ubude nobulukhuni).
Inqubo ye-7.Batch, indawo encane yokuhlala.
8.Qaphela i-automation yomkhiqizo oqhubekayo, yehlisa inani lokuqashwa.

Ipharamitha Yezobuchwepheshe

  I-HKJ900 I-HKC6
Amandla e-spindle motor 5.5kw 4.0kw
Amandla e-saw blade motor 8*5.0kw 3*5.0kw
Isivinini se-Saw blade motor 2500 - 5200rpm (Ukuguqulwa kwemvamisa) 2500 - 5200rpm (Ukuguqulwa kwemvamisa)
Imodi yokulungisa isikhala se-blade Ukulungiswa kwedijithali kwesikrini sokuthinta Ukulungiswa kwedijithali kwesikrini sokuthinta
Ukunemba kokulungiswa kwesikhala se-blade ±0.015mm ±0.015mm
I-diameter ye-saw blade 300-320mm 300-320mm
Ububanzi bembobo ngaphakathi kwensingo yesaha 140mm 140mm
Ubukhulu be-saw blade 1.8 - 3 mm 1.8 - 3 mm
Ukulungisa ububanzi bokuphakanyiswa kwe-saw blade -10 - 70mm (Thatha indiza esebenzayo njengesithenjwa) --
Imodi yokulungisa yokuphakamisa i-saw blade Ukulungiswa kwedijithali kwesikrini sokuthinta --
Isivinini sepuleti lokusaha 5 - 40m/min (Ukuguqulwa kwemvamisa) 5 - 40m/min (Ukuguqulwa kwemvamisa)
Ukujiya kwepuleti lokusaha 2-20 mm 2-20 mm
Ubukhulu bobubanzi bepuleti lesaha 1350 mm 600mm
Ibanga lobude bepuleti lesaha 500 - 2400mm 2400mm
Isisindo esiphelele semishini ≈5.5T ≈3.5T

  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona

    Imikhiqizo ehlobene

    • Imishini kaHawk Multi Rip Saw

      Imishini kaHawk Multi Rip Saw

      Amapharamitha wobuchwepheshe Amandla enjini enkulu: 18.5KW Injini yokuphakelayo: 1.5KW Isivinini esikhulu: 3200(r/min) Ukucaciswa kweblade yesaha: 300mmX3.2mmX2.2mmX(80-100)mm Isivinini sokusaha: Ishidi Elilungisekayo 15~35(m/min) ukuqondisa: < 0.2mm/m Ububanzi beblade yesaha: Ф80~Ф100mm Ubukhulu besaha: 3-25mm Ubukhulu: Ubude 2.2X Ububanzi 1.9X Ubude 1.2 (m) Isisindo: 2.6(T) I-mach...